|
Lightweight but high velocity objects can cause severe injury, so if you intend to use this thing, I recommend that you save it only for low-speed applications. Despite the fact that cut-off wheels are extemely light, the mandrel was dramatically bent to some 30 degrees. I can barely imagine at what velocity the mandrel would have shot off had it not snagged in the chuck jaws. Several other reviewers have commented on the tendency of this keyless chuck to wobble and loosen in use. Stick to the collet chucks for high speeds -- I personally have never, in some 20 years, seen one of these get loose while working with the Dremel. I recently had the keyless chuck vibrate loose while using a cut-off disk. In some 20 years of use of this accessory, I've also found this to be the case (the tool bit works loose during use about 1/3 of the time), but have also found that this is particularly dangerous at high tool speeds. Despite the fact that I felt a vibration in the tool and hurriedly moved to shut it down, by the time I did so, the mandrel had walked its way nearly fully out of the chuck, bent sharply sideways, but luckily stayed stuck in the chuck jaws long enough for me to shut down the tool.
It isn't perfect, and comes loose a lot, so I keep a pair of plyers handy so I can crank down on whatever tool I am using As long as the tight plyers are around, the chuck makes the dremel far more usable. The collet system makes me nuts, so I use the chuck. I have at least six dremels in constant use in my metal restoration shop. Using them to grind cut, smooth, polish and drill among other things.
Great item. This is pretty heavy duty and excellent quality. This chuck makes changing bits on the Dremel very quick and easy. I always hated having to look around for that wrench thing to change a bit.and I misplaced it a few times too.
for $9.95, check or Paypal, I'll provide instructions and 2 additional components that virtually eliminate breakage.And, if you haven't tried such a drill, for $12.95 I will send the instructions, kit, and 3 carbide drills for you to try. I have one and will get more. If you have ever tried to deal with a carbide drill, broken off in a drill hole that is critical, you will mightily appreciate this. When Harbor Freight sold these at half price, $4, I bought eight boxes.
In 1994 I purchased a Dremel kit and a version of this chuck was included. Quite honestly, if you have not had the delight of using a carbide to drill, say, medium-hard steel, or even a printed circuit board, you will be very pleased.W. so. I was quite excited as those who have worked with the fixed-size collets know how pesky they are, especially for small drill bits.ohmi Vibration.
However, if you've tried these, you know that using such bits on metals, even 'soft' metals, they break easily.Using the variable chuck I devised a solution. Curtiss Priest, Ph.D.Engineeremail: bmslib@mit.edu I contacted Dremel Manufacturing and they, in 1995, had withdrawn this chuck as it was "too heavy" and "did not run true." They were glad to send me a package of fixed collets (but, having about fifteen different Dremels -- AC and battery), I have enough collets, thank you.Several years passed and then I saw that the adjustable chuck was again provided. Dremel has solved the 'balance' issues which, are mighty, given the mass of this steel and speeds of 30K RPM.Also, I am a fan of the 50-bit box sets of carbide drills.
doesn't hold quite as snug as a collet. it may vary, but mine is nicely centered, no wobble.
|
